LATEST KINGSTON RAM

I HAVE SEARCH FOR THE LATEST RAM TECHNOLOGY.I HAVE FOUND SOME NEW KINGSTON DDR3 TECHNOLOGY.IT IS NEW SO THE USAGE OF THIS LATEST RAM IS STILL RARE.
THIS RAM STILL THE SAME.IT HAS HEADSINK TO MAKE THE RAM SLICE COOLER THAN BEFORE.THIS ARE THE SPECS :

DDR3-1375 CL7

ANOTHER COMPARISON THAT WE CAN LOOK IS THE CYLINDER OF THE RAM.WHEN DDR1 AND DDR2 IT USE ONLY 2.5CL AND 5 CL.NOW IT IS BIGGER THAN BEFORE DDR 3 USED 7 CYLINDER.SO THE PERFORMANCE IS MORE FASTER.

THE PACKAGING

ASSEMBLE A PC

ASSEMBLING A PC

WHAT DO YOU NEED TO ASSEMBLE A PC :

1- KNOWLEDGE

2- PARTS(HARDWARES)
3- TOOLS


5 IMPORTANT(BASIC) HARDWARES THAT YOU MUST HAVE :

1- ATX CASING
2- MAINBOARD ( ECS,MSI AND ETC)
3- RAM - MEMORY (KINGSTON,COSAIR,ETC)
4- PROCESSOR (INTEL,AMD)
5- HARDDISK (MAXTOR,SEAGATE,WESTERN DIGITAL)

OPTIONAL HARDWARES :

1- SOUND CARD
2- VGA CARDS ( MSI,SAPHIRRE,ETC) - AGP OR PCIEX
3- WIRELESS ADAPTER

REFORMATING LAPTOPS

FOR REFORMATTING LAPTOPS YOU NEED TO DO SOME SIMPLE STEPS UPON COMPLETING THE NEW OPERATING SYSTEM :

1- PREPARE CD :-
- OPERATING SYSTEM CD (EXP WINDOWS XP,VISTA,LINUX AND ETC)
- DRIVER CD (LAN,SOUND,MAINBOARD,VIDEO CARD,AND ETC)
- SOFTWARES CD (MICROSOFT OFFICE,ANTIVIRUS,ETC)
- SATA DRIVER ( FOR DOWNGRADING)

2- CHECK SYTEM (EITHER ICH8 OR HIGHER)- IF ICH8 OR HIGHER PREPARE THE SATA DRIVER
3- GO TO BIOS SETUP ( SOME BIOS HAVE TO PRESS F1 OR MAYBE F11 )
4- CHECK BOOT SEQUENCE
5- SET FIRST BOOT AS CD ROM/DVD
6- SAVE BIOS (PRESS F10->YES->YES)
7- RESTART

AFTER RESTART BOOT SEQUENCE WILL DETECT YOUR DVD ROM AND THESE WILL PROMPT OUT :

PRESS ANY KEY TO BOOT FROM CD.....

8- PREE F6 FOR SATA DRIVER(PUT THE FLOPPY)
9- PRESS ANY KEY ON YOUR KEYBOARD
10- FOLLOW THE ORDER OF THE CD ROMS
11- DEL ALL THE PARTITION OF YOUR HARDDISK(IF THERE WAS AN OLD WINDOWS) PRESS D
12- CREATE A NEW PARTITION
13- PRESS ENTER TO CONTINUE INSTALLING WINDOWS
14- WHEN FINISHED IT WILL RESTART(LET IT RESTART)
DONT PRESS ANY KEY UNTIL WINDOWS STARTUP
15- LET THE INSTALLATION BEGIN- KEY IN THE SERIAL NUMBER

AFTER FINISHED INSTALLATION RUN THE WINDOWS...

16- WHEN YOU ENTER THE WINDOWS INSTALL ALL THE DRIVER
17- LAST STEPS INSTALL ALL THE SOFTWARES THAT YOU WANT
18- RESTART THE PC AGAIN...

REFORMATING PC

REFORMATING PC

FOR REFORMATTING PC YOU NEED TO DO SOME SIMPLE STEPS UPON COMPLETING THE NEW OPERATING SYSTEM :

1- PREPARE CD :-
- OPERATING SYSTEM CD (EXP WINDOWS XP,VISTA,LINUX AND ETC)
- DRIVER CD (LAN,SOUND,MAINBOARD,VIDEO CARD,AND ETC)
- SOFTWARES CD (MICROSOFT OFFICE,ANTIVIRUS,ETC)

2- GO TO BIOS SETUP ( SOME BIOS HAVE TO PRESS F1 OR MAYBE F11 )
3- CHECK BOOT SEQUENCE
4- SET FIRST BOOT AS CD ROM/DVD
5- SAVE BIOS (PRESS F10->YES->YES)
6- RESTART

AFTER RESTART BOOT SEQUENCE WILL DETECT YOUR DVD ROM AND THESE WILL PROMPT OUT :

PRESS ANY KEY TO BOOT FROM CD.....

7- PRESS ANY KEY ON YOUR KEYBOARD
8- FOLLOW THE ORDER OF THE CD ROMS
9- DEL ALL THE PARTITION OF YOUR HARDDISK(IF THERE WAS AN OLD WINDOWS) PRESS D
10- CREATE A NEW PARTITION
11- PRESS ENTER TO CONTINUE INSTALLING WINDOWS
12- WHEN FINISHED IT WILL RESTART(LET IT RESTART)
DONT PRESS ANY KEY UNTIL WINDOWS STARTUP
13- LET THE INSTALLATION BEGIN- KEY IN THE SERIAL NUMBER

AFTER FINISHED INSTALLATION RUN THE WINDOWS...

14- WHEN YOU ENTER THE WINDOWS INSTALL ALL THE DRIVER
15- LAST STEPS INSTALL ALL THE SOFTWARES THAT YOU WANT
16- RESTART THE PC AGAIN...